Have you checked out our

Integrated SystemsFixed WirelessPortable WirelessFloor Pressure mat range

Scroll down to view a selection of our C-TEC 800 Series product range, or click on one of the brands below to go direct to their product range

C-TEC 800 Series Products

Standard Call Point, Button Reset c/w Remote Socket

An attractively designed button-operated call/reset point capable of generating standard calls on an 800 Series Call System.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary calling device.

Red reassurance LED confirms a call has been made.

Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).

Mounts on a standard UK 25mm single gang flush or surface back box.

Image
Image

Standard Call Point, Magnetic Reset c/w Remote Socket

An attractively designed button-operated call point capable of generating standard calls on an 800 Series Call System.

Includes a magnetic reset 'target' that requires a separately available NC803M magnetic reset key to operate.

Red reassurance LED confirms a call has been made.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary calling device.

Onboard magnetic reset 'target' cancels calls made from the NC802DM and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).

Mounts on a standard UK 25mm single gang flush or surface back box.

Standard Call Push with Protruding Button, No Reset, No Remote

A standard call point c/w protruding button for use with C-TEC's 800 Series Call System.

Red reassurance LED confirms a call has been made.

Requires a separate reset point for cancelling calls.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image
Image

Ceiling Pull Unit 800 series

Can be used to generate a standard call on an 800 Series Conventional Call System.

Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.

Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.

Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.

Surface mountable.

Base fits 16mm conduit and BESA centres.

Emergency Only Call Point, Button Reset

A button-operated call/reset point capable of generating emergency calls on an 800 Series Call System.

Onboard reset button cancels emergency calls made from the NC804DE and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).

Ideal for use as a reset point for ceiling pull units that will allow a more urgent Emergency call to be made if additional assistance is required.

Red reassurance LED confirms a call has been made.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image
Image

Emergency Infrared Call Point, Magnetic Reset c/w Remote Socket

A button operated call point c/w infrared receiver capable of generating standard and emergency calls on an 800 Series Call System.

Includes a magnetic reset 'target' that requires an NC803M magnetic reset key to operate.

Onboard infrared receiver will accept standard & emergency calls from compatible 800 Series infrared transmitters.

Calls can also be made by activating the call point's CALL button to make a standard call and the call point's CALL & RESET target together for an emergency call.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling device.

Red reassurance LED confirms a call has been made.

Onboard magnetic reset 'target' cancels standard and emergency calls made from the NC802DEWM and Standard calls made from other devices on the same zone.

Can be connected to up to 3 NC302RXCS slave infrared ceiling receivers to increase coverage.

Mounts on a standard UK 25mm single gang flush or surface back box.

Anti-Bacterial Wipe Clean Pull Cord Accessory Pack

A simple and cost-effective means of updating existing ceiling pulls to comply with the stringent hygiene regulations of many health authorities and inspection bodies.

A BS8300 compliant anti-bacterial wipe-clean pull cord pack suitable for use with C-TEC's Quantec and 800 Series ceiling pull units.

Contains 3m of red vinyl encapsulated cord, two triangular bangles and a red fixing bullet.

Cord has integral properties that can help prevent the spread of infections such as MRSA, e. coli, c. diff, S Aureus, and the Norovirus.

Ideal for use in hospitals, nursing and care homes, doctors' surgeries, clinics, and any other area where infection control is imperative.

Easy to clean using a clean cloth and mild detergent.

Also compatible with many other manufacturers' ceiling pull units.

Image
Image

C-TEC Ceiling Pull Cord Accessory Pack (Nylon)

Pull cord pack suitable for use with C-TEC's Quantec and 800 Series ceiling pull units.

Also compatible with many other manufacturers' ceiling pull units.

Contains 3m of red nylon cord, two triangular bangles and a red fixing bullet.

Emergency Infrared Call Point, Button Reset c/w Remote Socket

A button operated call/reset point c/w infrared receiver capable of generating standard and emergency calls on an 800 Series Call System.

Onboard infrared receiver will accept standard & emergency calls from compatible 800 Series infrared transmitters.

Calls can also be made by activating the call point's CALL button to make a standard call and the call point's CALL & RESET buttons together for an emergency call.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling device.

Red reassurance LED confirms a call has been made.

Onboard reset button cancels standard and emergency calls made from the NC802DEWB and standard calls made from other devices wired on the same zone.

Can be connected to up to three NC302RXCS slave infrared ceiling receivers to increase coverage.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image
Image

C-TEC 800 series and Quantec Coiled Tail Call Lead 1.2-3.6m (4-12ft)

An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems.

Allows users to remotely generate standard calls from armchairs, beds, etc.

Comprises a pear-shaped call push, coiled 1.2 - 3.6m trailing lead and a 6.5mm remote jack plug.

Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.

Activating the pear push or removing the tail call lead from a call point's remote socket will generate a standard call.

800 series Tail call lead 4.2 m (14ft)

A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems.

Allows users to remotely generate standard calls from armchairs, beds, etc.

Comprises a pear-shaped call push, 4.2m (14ft) trailing lead and a 6.35mm remote jack plug.

Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.

Activating the pear push or removing the tail call lead from a call point's remote socket will generate a standard call.

Image
Image

800 series Tail Call Lead 1.8 m (6 FT)

A short 1.8mtail call lead for use with C-TEC's Quantec and 800 Series Call Systems.

Allows users to remotely generate Standard calls from armchairs, beds, etc.

Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.

Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.

Activating the pear push or removing the tail call lead from a call point's remote socket will generate a Standard call.

Hand or Foot pneumatic pad (for us in conjunction with air switch)

Ideal for people who find it difficult to press the buttons on standard tail call leads.

Must be used in conjunction with a separately available Air Switch.

Applying pressure to the pneumatic pad operates the highly sensitive air switch which in turn, when connected to a compatible call point’s remote socket via its 6.35mm remote jack, triggers a standard call.

Image
Image

Air Switch for use with pneumatic pad

Designed for use with C-TEC's Pneumatic Pad.  Applying pressure to the pneumatic pad operates the air switch which in turn triggers a standard call when the 6.35mm jack plug is connected to a compatible call point’s remote socket.

Operates at a minimum differential air pressure of 0.9 p.s.i. (pounds per square inch) or 6220 Pa (pascals) ± 10% at 16ºC.

Button Reset Point

A button-operated reset point for use with C-TEC's 800 Series Call System.

Can be used to remotely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on the same zone.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image
Image

The C-TEC single magnetic reset key

Magnetic reset keys designed for use with the C-Tec Quantec and 800 Series call points, monitoring points and reset points with magnetic reset facility.  These keys allow the system to be reset by simply swiping the magnetic reset key past the reset call point, monitoring point, or reset point.

QUANTEC faceplate nut

Replacement hexagonal jack nut for use with C-TEC 800 series call points.

Simply screw onto the jack socket to replace those lost or damaged.

Pack of 10.

Image

C-TEC 800 Series Products

Standard Call Point, Button Reset c/w Remote Socket

An attractively designed button-operated call/reset point capable of generating standard calls on an 800 Series Call System.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary calling device.

Red reassurance LED confirms a call has been made.

Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

Standard Call Point, Magnetic Reset c/w Remote Socket

An attractively designed button-operated call point capable of generating standard calls on an 800 Series Call System.

Includes a magnetic reset 'target' that requires a separately available NC803M magnetic reset key to operate.

Red reassurance LED confirms a call has been made.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary calling device.

Onboard magnetic reset 'target' cancels calls made from the NC802DM and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

Standard Call Push with Protruding Button, No Reset, No Remote

A standard call point c/w protruding button for use with C-TEC's 800 Series Call System.

Red reassurance LED confirms a call has been made.

Requires a separate reset point for cancelling calls.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

Ceiling Pull Unit 800 series

Can be used to generate a standard call on an 800 Series Conventional Call System.

Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.

Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.

Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.

Surface mountable.

Base fits 16mm conduit and BESA centres.

Image

Emergency Only Call Point, Button Reset

A button-operated call/reset point capable of generating emergency calls on an 800 Series Call System.

Onboard reset button cancels emergency calls made from the NC804DE and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).

Ideal for use as a reset point for ceiling pull units that will allow a more urgent Emergency call to be made if additional assistance is required.

Red reassurance LED confirms a call has been made.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

Emergency Infrared Call Point, Magnetic Reset c/w Remote Socket

A button operated call point c/w infrared receiver capable of generating standard and emergency calls on an 800 Series Call System.

Includes a magnetic reset 'target' that requires an NC803M magnetic reset key to operate.

Onboard infrared receiver will accept standard & emergency calls from compatible 800 Series infrared transmitters.

Calls can also be made by activating the call point's CALL button to make a standard call and the call point's CALL & RESET target together for an emergency call.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling device.

Red reassurance LED confirms a call has been made.

Onboard magnetic reset 'target' cancels standard and emergency calls made from the NC802DEWM and Standard calls made from other devices on the same zone.

Can be connected to up to 3 NC302RXCS slave infrared ceiling receivers to increase coverage.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

Anti-Bacterial Wipe Clean Pull Cord Accessory Pack

A simple and cost-effective means of updating existing ceiling pulls to comply with the stringent hygiene regulations of many health authorities and inspection bodies.

A BS8300 compliant anti-bacterial wipe-clean pull cord pack suitable for use with C-TEC's Quantec and 800 Series ceiling pull units.

Contains 3m of red vinyl encapsulated cord, two triangular bangles and a red fixing bullet.

Cord has integral properties that can help prevent the spread of infections such as MRSA, e. coli, c. diff, S Aureus, and the Norovirus.

Ideal for use in hospitals, nursing and care homes, doctors' surgeries, clinics, and any other area where infection control is imperative.

Easy to clean using a clean cloth and mild detergent.

Also compatible with many other manufacturers' ceiling pull units.

Image

C-TEC Ceiling Pull Cord Accessory Pack (Nylon)

Pull cord pack suitable for use with C-TEC's Quantec and 800 Series ceiling pull units.

Also compatible with many other manufacturers' ceiling pull units.

Contains 3m of red nylon cord, two triangular bangles and a red fixing bullet.

Image

Emergency Infrared Call Point, Button Reset c/w Remote Socket

A button operated call/reset point c/w infrared receiver capable of generating standard and emergency calls on an 800 Series Call System.

Onboard infrared receiver will accept standard & emergency calls from compatible 800 Series infrared transmitters.

Calls can also be made by activating the call point's CALL button to make a standard call and the call point's CALL & RESET buttons together for an emergency call.

Includes a 6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling device.

Red reassurance LED confirms a call has been made.

Onboard reset button cancels standard and emergency calls made from the NC802DEWB and standard calls made from other devices wired on the same zone.

Can be connected to up to three NC302RXCS slave infrared ceiling receivers to increase coverage.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

C-TEC 800 series and Quantec Coiled Tail Call Lead 1.2-3.6m (4-12ft)

An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems.

Allows users to remotely generate standard calls from armchairs, beds, etc.

Comprises a pear-shaped call push, coiled 1.2 - 3.6m trailing lead and a 6.5mm remote jack plug.

Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.

Activating the pear push or removing the tail call lead from a call point's remote socket will generate a standard call.

Image

800 series Tail call lead 4.2 m (14ft)

A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems.

Allows users to remotely generate standard calls from armchairs, beds, etc.

Comprises a pear-shaped call push, 4.2m (14ft) trailing lead and a 6.35mm remote jack plug.

Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.

Activating the pear push or removing the tail call lead from a call point's remote socket will generate a standard call.

Image

800 series Tail Call Lead 1.8 m (6 FT)

A short 1.8mtail call lead for use with C-TEC's Quantec and 800 Series Call Systems.

Allows users to remotely generate standard calls from armchairs, beds, etc.

Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.

Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.

Activating the pear push or removing the tail call lead from a call point's remote socket will generate a standard call.

Image

Hand or Foot pneumatic pad (for us in conjunction with air switch)

Ideal for people who find it difficult to press the buttons on standard tail call leads.

Must be used in conjunction with a separately available Air Switch.

Applying pressure to the pneumatic pad operates the highly sensitive air switch which in turn, when connected to a compatible call point’s remote socket via its 6.35mm remote jack, triggers a standard call.

Image

Air Switch for use with pneumatic pad

Designed for use with C-TEC's Pneumatic Pad.  Applying pressure to the pneumatic pad operates the air switch which in turn triggers a standard call when the 6.35mm jack plug is connected to a compatible call point’s remote socket.

Operates at a minimum differential air pressure of 0.9 p.s.i. (pounds per square inch) or 6220 Pa (pascals) ± 10% at 16ºC.

Image

Button Reset Point

A button-operated reset point for use with C-TEC's 800 Series Call System.

Can be used to remotely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on the same zone.

Mounts on a standard UK 25mm single gang flush or surface back box.

Image

The C-TEC single magnetic reset key

Magnetic reset keys designed for use with the C-Tec Quantec and 800 Series call points, monitoring points and reset points with magnetic reset facility.  These keys allow the system to be reset by simply swiping the magnetic reset key past the reset call point, monitoring point, or reset point.

Image

QUANTEC faceplate nut pack of 10

Replacement hexagonal jack nut for use with C-TEC 800 series call points.

Simply screw onto the jack socket to replace those lost or damaged.

Pack of 10.

Image

Receive a Quotation

© 2021 nursecallequipment.co.uk. All Rights Reserved. Nurse Call Equipment (J Gleeson T/A), Gemma House, 39 Lilestone Street, London, NW88SS
Or visit us on our social media channels
Telephone

0333 090 5492

M-F 08:00 - 17:00